pro task10,iout

; itask=10 Generate a newair.json file for pure air with multiple cases based upon
;          a template file. Calculate for two wavelength bands (300-700 nm), (700 - 5000 nm).

; ******************************
; Specify the template file (for one case)
; You read in the file and save each line.
; Then you write out to a new json file 
; by changing several of the original lines

; Be sure to specify solar zenith angles(s) at this line below
;     Need to specify the solar zenith angle(s) here !!

; To create a json file for Bruce put ibruce=1
; The subdirectory (output for Steve) is not appended to the file path name)
   ibruce=0

; ******************************
; Write out to the new json file
; Note use of   air   at start of the output file pathname
; Note use of   air   in the output json file
    filenew='newair_steve.json'
   if (ibruce eq 1) then begin
    filenew='newair_bruce.json'
   endif

    printf,iout,'  '
    printf,iout,'  task10: will write out to filenew '
    printf,iout,'  ',filenew

; Open the output json file
     idat=50
    openw,idat,filenew

; *******
; At the start of the json file
    wordstr1='{'
    wordstr2='  "MODTRAN": ['

    printf,idat,wordstr1
    printf,idat,wordstr2

; *******
; Careful (do this at end of the 2nd calculation
; At the close of the json file
    wordstr3='  ]'
    wordstr4='}'

; **********************************************************
; Loop over the 2 wavelength bands
; ncase is 0 based
    ncase=-1
; nc is 1 based
    nc=0
   for iband=0,1 do begin

; ******************************
; For 300 to 700 nm
   if (iband eq 0) then begin
; Note that you cp this file from your desktop, deleted the first 2 lines,
; deleted the last two lines, and added a  , to the last line
    finput='libera_300_700_onecase_air.json'
    nlines=59
    wavestr='300700'
   endif

   if (iband eq 1) then begin
; Note that you cp this file from your desktop, deleted the first 2 lines,
; deleted the last two lines, and added a  , to the last line
    finput='libera_700_5000_onecase_air.json'
    nlines=59
    wavestr='7005000'
   endif

   print,'  '
   print,'  iband ',iband
   print,'  finput ',finput
   print,'  nlines ',nlines

   printf,iout,'  '
   printf,iout,'  task10: iband ',iband
   printf,iout,'  task10: finput ',finput
   printf,iout,'  task10: nlines ',nlines

; ******************************
; Specify the character strings
   datastrinput=strarr(nlines)
   datastrnew=strarr(nlines)
   linedat=strarr(1)

; ******************************
; Read in the file
    idat2=60
   openr,idat2,finput

; Special write
; This allows you to specify line numbers for which you can
; alter the json line specifics for each calculation
     iwrsp=1
    if (iwrsp eq 1) then begin
     printf,iout,' '
     printf,iout,'  task10: i,datastrinput(i)'
    endif

; Read in the nlines lines
   for i=0,nlines-1 do begin
    readf,idat2,linedat

; input
    datastrinput(i)=linedat

; will change below
    datastrnew(i)=linedat

    if (iwrsp eq 1) then begin
     printf,iout,i,' ',datastrinput(i)
    endif

   endfor

; Close the input file
   close,idat2

;  stop

; ******************************
; Specify the calculations to do
    icalc=1

   if (icalc eq 1) then begin

; specify the output directory that the MODTRAN6 output files go to
    foutputdir='\\\\lasp-store\\home\\massiest\\Documents\\MODTRAN6\\output\\'
    ilinedir=2

; specify the description
;   descriptstr='libera_400_1700 nm'
;   ilinedescript=3

; the case
    ilinecase=4

; specify the number of streams
    nstrstr='16'
    ilinenstr=12

; observation zenith
; 180 means you look straight down
    ilineobszen=26

; PARM1
; solar azimuth
    ilinesunaz=28

; PARM2
; solar zenith angle
    ilinesunsza=29

;     42           "V1": 440.0,
;     43           "V2": 1700.0,
;     44           "DV": 5.0,
;     45           "FWHM": 5.0,
    if (iband eq 0) then begin
     v1str='300.0'
    endif
    if (iband eq 1) then begin
     v1str='700.0'
    endif
    ilinev1=42

    if (iband eq 0) then begin
     v2str='700.0'
    endif
    if (iband eq 1) then begin
     v2str='5000.0'
    endif
    ilinev2=43

    dvstr='5.0'
    ilinedv=44

    if (iband eq 0) then begin
     fwhmstr='5.0'
    endif
    if (iband eq 1) then begin
     fwhmstr='40.0'
    endif
    ilinefwhm=45

;    58     },
     lastlinestr='}'
     ilastline=58

; *******
; Specify the cases to work with

; Will loop over solar zenith angle
     nsolarzen=1
    solarzen=fltarr(nsolarzen)

; Need to specify the solar zenith angle(s) here !!
    solarzen=[15.0]

; Will loop over sensor zenith angle
; Note that 180 means you look straight downwards
     nsensorzen=9
    sensorzen=fltarr(nsensorzen)
    for i=0,nsensorzen-1 do begin
     sensorzen(i)=90.0+10.0+(10.0*i)
    endfor
    print, 'sensorzen ',sensorzen

; Will loop over solar azimuth
     nrelaz=18
    relaz=fltarr(nrelaz)
    for i=0,nrelaz-1 do begin
     relaz(i)=0.0+(20.0*i)
    endfor
    print,'relaz ',relaz

; *******

   endif
; icalc=1

; *******
; Will note when you have the last case
; Will compare nlast to nc
     nlast=0
    for m1=0,nsolarzen-1 do begin
    for m2=0,nsensorzen-1 do begin
    for m3=0,nrelaz-1 do begin
     nlast=nlast+1
    endfor
    endfor
    endfor

; Since you have 2 bands, double nlast
    nlast=(nlast*2)
    print,' total number of cases ',nlast
    printf,iout,' '
    printf,iout,' task10: total number of cases ',nlast
;   stop

; *******
; Loop over cases
; Cases go from 0 to nlast
    for m1=0,nsolarzen-1 do begin
     solarzenstr=strcompress(string(solarzen(m1)))

    for m2=0,nsensorzen-1 do begin
     obszenstr=strcompress(string(sensorzen(m2)))

    for m3=0,nrelaz-1 do begin
     relazstr=strcompress(string(relaz(m3)))

; ******
; Specify datastrnew again for each case
     for i=0,nlines-1 do begin
      datastrnew(i)=datastrinput(i)
     endfor

; ******
; Output directory
     str1=strcompress(string(fix(solarzen(m1))))
      noprd=0
     task10delete,noprd,iout,str1

     str2=strcompress(string(fix(sensorzen(m2))))
     task10delete,noprd,iout,str2

     str3=strcompress(string(fix(relaz(m3))))
     task10delete,noprd,iout,str3

; Note use of   air   at start of the output file pathname
     str4=strcompress('air'+wavestr+'solarzen'+str1+'sensorzen'+str2+'reflaz'+str3)
     filestr=strcompress(foutputdir+str4)
     if (ibruce eq 1) then begin
      filestr=strcompress(str4)
     endif

;    printf,iout,'  '
;    printf,iout,str1
;    printf,iout,filestr

; ******
; Modify various lines
; Be sure the number of first blank spaces is correct

; Case
    ncase=ncase+1
    nc=nc+1
    casestr=strcompress(string(fix(ncase)))
;   printf,iout,casestr
;   stop

; ******
; Write out to the new file
;       "NAME": "\\\\lasp-store\\home\\massiest\\Documents\\MODTRAN6\\output\\streams4",

;             '1'
    strblank1=' '
;             '1234'
    strblank4='    '
;             '1234567'
    strblank7='       '
;             '12345678'
    strblank8='        '
;             '12345678901'
    strblank11='          '
;             '123456789012'
    strblank12='           '

    strp='"'
    strc=':'
    strcomma=','

; ******
; The output directory
    datastrnew(ilinedir)=string(strblank8+strp+'NAME'+strp+strc+strblank1+strp+filestr+strp+strcomma)

; The case
;       "CASE": 0,
    datastrnew(ilinecase)=string(strblank8+strp+'CASE'+strp+strc+casestr+strcomma)

; The number of streams
;         "NSTR": 4,
    datastrnew(ilinenstr)=string(strblank11+strp+'NSTR'+strp+strc+nstrstr+strcomma)

; The sensor zenith angle (MODTRAN6 figure 4.1)
;         "OBSZEN": 120.0,
    datastrnew(ilineobszen)=string(strblank11+strp+'OBSZEN'+strp+strc+obszenstr+strcomma)

; ****
; Realative azimuth
;         "PARM1": 70.0,
    datastrnew(ilinesunaz)=string(strblank11+strp+'PARM1'+strp+strc+relazstr+strcomma)

; Solar zenith angle
; Note that a commma is not added to the line since TRUEZ is at the end of geometry section
;         "PARM2": 30.0,
    datastrnew(ilinesunsza)=string(strblank11+strp+'PARM2'+strp+strc+solarzenstr)

; ****
; The lower wavelength in nm
;         "V1": 440.0,
;   datastrnew(ilinev1)=string(strblank11+strp+'V1'+strp+strc+v1str+strcomma)

; The upper wavelength in nm
;         "V2": 1700.0,
;   datastrnew(ilinev2)=string(strblank11+strp+'V2'+strp+strc+v2str+strcomma)

; The output is in dv (hmmmm, MODTRAN6 has a mind of its own, whatever).
;         "DV": 5.0,
    datastrnew(ilinedv)=string(strblank11+strp+'DV'+strp+strc+dvstr+strcomma)

; fwhm of traiangular filter function
;         "FWHM": 5.0,
    datastrnew(ilinefwhm)=string(strblank11+strp+'FWHM'+strp+strc+fwhmstr+strcomma)

; ****
; Last line (does not have a comma)
    if ((nc eq nlast) and (iband eq 1)) then begin
     datastrnew(ilastline)=string(strblank4+lastlinestr)
     print,'  last case, do not add comma'
    endif

; ******
; Write out to the new json file
    for i=0,nlines-1 do begin
     printf,idat,datastrnew(i)
    endfor

; ******
    endfor
; loop over nrelaz
    endfor
; loop over nsensorzen
    endfor
; loop over nsolarzen

    endfor
; Loop over the iband=0,1 wavelength bands

; ******************************
; At the end of the new json file
    printf,idat,wordstr3
    printf,idat,wordstr4

; ******************************
   ntotal=ncase+1

   printf,iout,'  '
   printf,iout,'  task10: the json files has ntotal ',ntotal
   printf,iout,'  task10: cases, labeled case=0,1,2,..ntotal-1 '  
   printf,iout,'  task10: should be equal to nc ',nc

; Close the output file
    print,filenew
    close,idat

    printf,iout,'  '
    printf,iout,'  task10: wrote out to filenew '
    printf,iout,'  ',filenew

; ******************************
   return
   end